Page: 1
/ 15
Total 75 questions
XYZ Corporation has been using a CLARiiON to support the data requirements on its
Windows 2000 File and Print Cluster. XYZ has just decided that it would create a more flexible environment if the servers booted from SAN. What will XYZ need to do to create a supported boot-from-SAN Windows 2000 Cluster environment?
- A. Expand the existing LUNs and use the additional space to mirror the System and Boot Partitions
- B. Create boot LUNs, add them to the existing Storage Group and mirror the System and Boot Partitions to the new LUNs
- C. Add two new HBAs, add them to the existing Storage Group, create boot LUNs, add them to the existing Storage Group and mirror the System and Boot Partitions to the new LUNs
- D. Add two new HBAs, manually register them, add them to a new Storage Group, create boot LUNs, add them to the new Storage Group and mirror the System and Boot Partitions to the new LUNs
Answer : D
Certain characteristics of a well designed application allow it to make most efficient use of a
CLARiiON storage system. What are two [2] of these characteristics?
- A. Uses a single thread for random access patterns
- B. Uses a large thread count for random access patterns
- C. Uses writes less than 1MB when data will not be re-read
- D. Uses writes greater than 1MB when data will not be re-read
Answer : B,D
WWE Furniture Removers has a CX700 at its headquarters site, and a CX500 at its DR site. The sites are separated by a distance of 700 km. You have determined that
MirrorView/A is the solution that best matches the company's needs. You need to plan the zoning for the company's sites to balance host I/O and MirrorView/A I/O across the
CLARiiON ports. Which configuration would you choose?
- A. For the CX700: Host access to ports 1, 2 and 3, and MirrorView/A on port 0 of each SP For the CX500: Host I/O on port 0 and MirrorView/A I/O on port 1 of each SP
- B. For the CX700: Host access to ports 0, 1 and 2, and MirrorView/A on port 3 of each SP For the CX500: Host I/O on port 0 and MirrorView/A I/O on port 1 of each SP
- C. For the CX700: Host access to ports 0, 1 and 2, and MirrorView/A on port 3 of each SP For the CX500: Host I/O on port 1 and MirrorView/A I/O on port 0 of each SP
- D. For the CX700: Host access to ports 0, 1 and 2, and MirrorView/A access on port 3 of each SP For the CX500: Host I/O and MirrorView/A I/O on ports 0 and 1 of each SP
Answer : B
Click the Exhibit button. HH Inc. bought a CLARiiON CX700 array and an HP-UX server for its internet video services. The system was set up with Pvlinks; however, performance was below expected levels. HH then decided to buy PowerPath with the load balancing option.
The HP-UX server is zoned with eight paths to the CLARiiON. After installation of
PowerPath 4.3 only one path per HBA shows up as active and the other three show up as unlicensed. What are the two [2] most likely causes of this problem?
- A. The license code was not entered
- B. Eight paths are not allowed in this configuration
- C. The powermt config command should have been used
- D. The powermt set policy command should have been used
Answer : A,D
31 days access 