Page: 1
/ 10
Total 138 questions
You have 200 Azure virtual machines.
You create a recovery plan in Azure Site Recovery to fail over all the virtual machines to an Azure region. The plan has three manual actions.
You need to replace one of the manual actions with an automated process.
What should you use?
- A. an Azure Desired State Configuration (DSC) virtual machine extension
- B. an Azure Automation runbook
- C. an Azure PowerShell function
- D. a Custom Script Extension on the virtual machines
Answer : B
Reference:
https://docs.microsoft.com/en-us/azure/site-recovery/recovery-plan-overview
You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed. You have a Hyper-V failover cluster named Cluster1. All servers are members of the same domain.
You need to ensure that you use Hyper-V Replica with Kerberos authentication on the default port to replicate virtual machines from Cluster1 to Server1.
What should you do on Server1?
- A. Add primary servers to the Hyper-V Replica Broker configuration.
- B. From Hyper-V Settings, select Enable incoming and outgoing live migrations.
- C. From Windows Defender Firewall with Advanced Security, enable the Hyper-V Replica HTTPS Listener (TCP-In) rule.
- D. From Windows Defender Firewall with Advanced Security, enable the Hyper-V Replica HTTP Listener (TCP-In) rule.
Answer : D
Reference:
https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/manage/set-up-hyper-v-replica
You have an on-premises server named Server1 that runs Windows Server. You have an Azure subscription.
You plan to back up the files and folders on Server1 to Azure by using Azure Backup.
You need to define how long the backups will be retained.
What should you use to configure the retention?
- A. Windows Server Backup
- B. a Recovery Services vault
- C. the Microsoft Azure Recovery Services (MARS) agent
- D. Backup center
Answer : C
HOTSPOT
-
You have three Hyper-V hosts named Server1, Server2, and Server3 that run Windows Server, Server1 hosts a virtual machine named VM1.
You enable Hyper-V Replica to replicate VM1 to Server2 and set the replication frequency to 30 seconds.
You need to extend the replication and create a second replica of VM1.
On which Hyper-V hosts should you configure the replication, and what is the minimum replication frequency you can use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer :
HOTSPOT
-
You have an Azure subscription.
You plan to deploy a virtual machine named VM1 to the East US Azure region and use Azure Site Recovery between availability zones.
You need to configure the disks on VM1 and the virtual network. The solution must meet the following requirements:
• Maximize the availability of VM1.
• Maintain the private IP address of VM1 during failover and failback operations.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer :
Your network contains an on-premises Active Directory Domain Services (AD DS) domain. The domain contains two virtual machines named VM1 and VM2 that run Windows Server.
You plan to implement a failover cluster named Cluster1 that will use VM1 and VM2 as nodes.
You need to ensure that Cluster1 can use floating IP addresses.
Which two components should you deploy? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Network Load Balancing (NLB)
- B. the MultiPoint Services role
- C. the Network Controller role
- D. the Host Guardian Service role
- E. Software Load Balancer (SLB)
Answer : CE
DRAG DROP -
You manage 200 physical servers that run Windows Server.
You plan to migrate the servers to Azure.
You need to prepare for discovery of the servers by using Azure Migrate.
Which three actions should you perform in sequence on a physical server? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Answer :
Reference:
https://docs.microsoft.com/en-us/azure/migrate/tutorial-discover-physical
DRAG DROP -
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The functional level of the forest and the domain is Windows
Server 2012 R2. The domain contains the domain controllers shown in the following table.
You need to raise the forest functional level to Windows Server 2016. The solution must meet the following requirements:
✑ Ensure that there are three domain controllers after you raises the level.
✑ Minimize how long the FSMO roles are unavailable.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Answer :
You have an on-premises server that runs Windows Server and has the Web Server (IIS) server role installed. The server hosts a web app that connects to an on- premises Microsoft SQL Server database.
You plan to migrate the web app to an Azure App Services web app. The database will remain on-premises.
You need to ensure that the migrated web app can access the database.
What should you configure in Azure?
- A. an Azure SQL managed instance
- B. an on-premises data gateway
- C. Azure Extended Network
- D. a Hybrid Connection
Answer : D
Reference:
https://docs.microsoft.com/en-us/azure/app-service/app-service-hybrid-connections
You have two file servers named Server1 and Server2 that run Windows Server. Server1 contains a shared folder named Data. Data contains 10 TB of data.
You plan to decommission Server1.
You need to migrate the files from Data to a new shared folder on Server2. The solution must meet the following requirements:
✑ Ensure that share, file, and folder permissions are copied.
✑ After the initial copy occurs, ensure that changes in \\Server1\Data can be synced to the destination without initiating a full copy.
✑ Minimize administrative effort.
What should you use?
- A. xcopy
- B. Storage Replica
- C. Storage Migration Service
- D. azcopy
Answer : C
Reference:
https://docs.microsoft.com/en-us/windows-server/storage/storage-migration-service/overview#why-use-storage-migration-service
HOTSPOT -
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table.
Server3 contains a share named Share1.
On Server1, DHCP has the following configurations:
✑ Conflict detection attempts: 3
✑ An IPv4 scope named Scope1 that has the following settings:
1. Address Pool: 172.16.10.100 - 172.16.10.130
2. Address Leases:
- 172.16.10.100 computer1.contoso.com
- 172.16.10.101 computer2.contoso.com
✑ Reservations: 172.16.10.101 computer2.contoso.com
✑ Policies: Policy1
You perform the following actions:
On Server1, you run -
Export-DhcpServer -File \\Server3\Share1\File1.xml.
✑ On Server2, you run
Import-DhcpServer -File \\Server3\Share1\File1.xml
-BackupPath \\Server3\Share1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
Answer :
Reference:
https://docs.microsoft.com/en-us/powershell/module/dhcpserver/export-dhcpserver?view=windowsserver2022-ps https://docs.microsoft.com/en-us/powershell/module/dhcpserver/import-dhcpserver?view=windowsserver2022-ps
DRAG DROP -
You have a server named Server1 that runs Windows Server and has the Web Server (IIS) server role installed. Server1 hosts an ASP.NET Core web app named
WebApp1 and the app's source files.
You install Docker on Server1.
You need to ensure that you can deploy WebApp1 to an Azure App Service web app from the Azure Container Registry.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Answer :
Step 1: Create a Dockerfile. This file contains instructions for the build process.
Step 2: Run the docker build command to create a container image.
Step 3: Run the docker push command to upload the image to Azure Container Registry.
HOTSPOT -
You have two servers that have the Web Server (IIS) server role installed. The servers are configured as shown in the following table.
Both servers are configured to enable website deployment by using the Web Deployment Tool. Server1 hosts a website named Site1 that has Web Deploy
Publishing configured.
You plan to migrate Site1 to Server2.
You need to perform a pull synchronization of Site1 by using the Web Deployment Agent Service.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
Answer :
Reference:
https://docs.microsoft.com/en-us/iis/publish/using-web-deploy/synchronize-iis
HOTSPOT -
You have a server that runs Windows Server and has the Web Server (IIS) server role installed. Server1 hosts a single website that has the following configurations:
✑ Is accessible by using a URL of https://www.contoso.com:8443 and has an SSL certificate that was issued by a third-party certification authority (CA) in the
Microsoft Trusted Root Program -
✑ Uses anonymous authentication
✑ Was developed by using PHP
You plan to use APP Service Migration Assistant to migrate the website to Azure App Service.
You need to migrate the website. The solution must minimize the number of changes made to the existing website.
What should you do manually to ensure that the website migration is successful? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
Answer :
Reference:
https://docs.microsoft.com/en-us/learn/modules/migrate-app-service-migration-assistant/3-understand-assessment https://docs.microsoft.com/en-us/learn/modules/migrate-app-service-migration-assistant/5-understand-migration
DRAG DROP -
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains a print server named Server1. All printers are deployed to users by using a Group Policy Object (GPO) named GPO1.
You deploy a new server named Server2.
You need to decommission Server1. The solution must meet the following requirements:
✑ Migrate the shared printers to Server2 by using the Printer Migration Wizard.
✑ Ensure that the users use the printers on Server2.
Minimize downtime for the users.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Answer :
Reference:
https://docs.microsoft.com/en-us/archive/blogs/canitpro/step-by-step-migrating-print-servers-from-windows-server-2008-to-windows-server-2012
30 days access 